Part Number Hot Search : 
1211391K 2SK250 00GB1 TLV43 LAN9313I TIP127 M2100 R6200230
Product Description
Full Text Search
 

To Download ARF449B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 D G S
TO-247
ARF449A ARF449B
Common Source
RF POWER MOSFETs
N - CHANNEL ENHANCEMENT MODE 150V 90W 120MHz
The ARF449A and ARF449B comprise a symmetric pair of common source RF power transistors designed for pushpull scientific, commercial, medical and industrial RF power amplifier applications up to 120 MHz.
* Specified 150 Volt, 81.36 MHz Characteristics: * Output Power = 90 Watts. * Gain = 13dB (Class C) * Efficiency = 75%
MAXIMUM RATINGS
Symbol VDSS VDGO ID VGS PD RJC TJ,TSTG TL Parameter Drain-Source Voltage Drain-Gate Voltage Continuous Drain Current @ TC = 25C Gate-Source Voltage Total Power Dissipation @ TC = 25C Junction to Case
* Low Cost Common Source RF Package. * Very High Breakdown for Improved Ruggedness. * Low Thermal Resistance. * Nitride Passivated Die for Improved Reliability.
All Ratings: TC = 25C unless otherwise specified.
ARF449A/449B UNIT Volts
450 450 9 30 165 0.76 -55 to 150
C Amps Volts Watts C/W
Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec.
300
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS VDS(ON) IDSS IGSS gfs VGS(TH) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250 A) On State Drain Voltage
1
MIN
TYP
MAX
UNIT Volts
450 4 25
A
(ID(ON) = 5A, VGS = 10V)
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Forward Transconductance (VDS = 25V, ID = 5A) Gate Threshold Voltage (VDS = VGS, ID = 50mA)
250 100 3 2 5.8 5
nA mhos Volts
7-2003 050-4909 Rev C
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss td(on) tr td(off) tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Test Conditions VGS = 0V VDS = 150V f = 1 MHz VGS = 15V VDD = 0.5 VDSS ID = ID[Cont.] @ 25C RG = 1.6y MIN TYP
ARF449A/449B
MAX UNIT
980 87 25 5 3.1 15 3
1200 120 40 10 7 25 7
ns pF
FUNCTIONAL CHARACTERISTICS
Symbol GPS Characteristic Common Source Amplifier Power Gain Drain Efficiency Electrical Ruggedness VSWR 20:1 Test Conditions f = 81.36 MHz VGS = 0V VDD = 150V MIN TYP MAX UNIT dB %
12 70
13 75
Pout = 90W
No Degradation in Output Power
1 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% APT Reserves the right to change, without notice, the specifications and information contained herein.
30 25 20
GAIN (dB)
3000 Class C VDD = 150V Pout = 150W
CAPACITANCE (pf)
1000 500
Ciss
Coss 100 Crss 50
15
10 5 0 30
60 75 90 105 120 FREQUENCY (MHz) Figure 1, Typical Gain vs Frequency
45
1 5 10 50 150 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 2, Typical Capacitance vs. Drain-to-Source Voltage
10
16
ID, DRAIN CURRENT (AMPERES)
TJ = -55C
VDS> ID (ON) x RDS (ON)MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
50
ID, DRAIN CURRENT (AMPERES)
OPERATION HERE LIMITED BY RDS (ON)
10S 100S
12
10 5 1mS
8
10mS 1 .5 TC =+25C TJ =+150C SINGLE PULSE .1 1 5 10 50 100 500 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 4, Typical Maximum Safe Operating Area 100mS DC
7-2003
4 TJ = +125C TJ = -55C
050-4909 Rev C
TJ = +25C 0 0 2 4 6 8 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) Figure 3, Typical Transfer Characteristics
ARF449A/449B
1.2 1.1 1.0 0.9 0.8
ID, DRAIN CURRENT (AMPERES) VGS(th), THRESHOLD VOLTAGE (NORMALIZED)
25
20 VGS=8, 10 & 15V 15 6.5V
6V
10
5.5V
0.7 0.6 -50 -25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) Figure 5, Typical Threshold Voltage vs Temperature 160 Class C VDD = 150V
5
5V 4.5V
0
1 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 6, Typical Output Characteristics
f = 81.36 MHz 120
GPS, COMMON SOURCE AMPLIFIER GAIN (dB)
14
POUT, POWER OUT (WATTS)
12
Class C VDD = 150V f = 81.36 MHz
80
10
40
8
0
0
4 6 8 10 PIN, POWER IN (WATTS) Figure 7, Typical Power Out vs Power In
2
40 80 120 160 POUT, POWER OUT (WATTS) Figure 8, Typical Common Source Amplifier Gain vs Power Out
6 0
0.8 D=0.5
, THERMAL IMPEDANCE (C/W)
0.2 0.1 0.05 0.1 0.05 0.02 0.01 0.01 0.005 SINGLE PULSE Note:
PDM t1 t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZJC + TC
Z
JC
0.001 10-5
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) Figure 9, Typical Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration
10-4
10
Table 1 - Typical Class C Large Signal Input-Output Impedance Freq. (MHz) 2.0 13.5 27.0 40.0 65.0 80.0 100.0 Z in () 23.00 - j 7.0 4.30 - j 9.1 1.00 - j 4.2 0.42 - j 1.7 0.35 + j 1.1 0.56 + j 2.5 0.90 + j 3.8 Z OL () 93.0 - j 10 63.0 - j 43 32.0 - j 43 17.5 - j 34 7.7 - j 22 5.1 - j 16 3.4 - j 12
Z in - gate shunted by 25 Z OL - conjugate of optimum load impedance for 150W at 150V
050-4909 Rev C
7-2003
ARF449A/449B
81.36 MHz Test Circuit
Parts List
C1 -- 680pF Unelco C2-C4 -- Arco 463 Mica Trimmer C5-C7 -- 1nF 500V COG chip L1 -- 0.8" #18 AWG into hairpin ~19nH L2-L3 -- 3t #18 AWG .25" ID ~50nH L4 -- 10t #18 AWG .25" ID ~470nH L5 -- VK200-4B ferrite choke ~3uH R1 -- 25 Ohm 1/2W Carbon T1 -- 4:1 Broadband Transformer
L5
+
C6 L4 L2 C5
C7
-
150V
L3
RF Output
RF Input T1
L1
DUT
C3
C4
C2
C1
R1
81.36 MHz Test Circuit
TO-247 Package Outline
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 20.80 (.819) 21.46 (.845)
Top View 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
Dimensions in Millimeters and (Inches) NOTE: The ARF446 and ARF447 comprise a symmetric pair of RF power transistors and meet the same electrical specifications. The device pin-outs are the mirror image of each other to allow ease of use as a push-pull pair.
Source
3.55 (.138) 3.81 (.150)
4.50 (.177) Max. 0.40 (.016) 0.79 (.031)
2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084)
19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055)
Device ARF449A ARF449B Gate Drain Source Source Drain Gate
7-2003
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
050-4909 Rev C
APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.


▲Up To Search▲   

 
Price & Availability of ARF449B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X